| Commercial Vehicle Garage Equipments - Engine Service Equipments |
|
|
| Engine Service Equipments |
|
| |
| Engine Fixture (OLS - 776) |
|
- This Equipment is designed to hold the heavy engine during overhauling. It has mechanism of locking & rotating the engine as per requirement
- Capacity for engine upto 1.5 ton .
- 360 degree rotatable type with gear box.
- Suitable for all heavy Commercial vehicles
engine.
|
 |
| Engine Fixture (OLS - 777) |
|
- To hold the engine during engine overhauling.
- Locking, lifting and rotating.
- 360 degree rotation.
- Less fatigue for technicians.
|
| |
 |
|
|
| |
| Engine Stand Trolley Type (OLS - 778) |
|
- Hydraulic Operated thru Manual Pump.
- MS Structure Scissor Type Design,
- Adjustable Supports for Engine Base & Transmission Support Scissor Stand.
- Movement is controlled by Lead screws.
- Twin Hyd. Cylinders Dia. 50mm.
- Powder Coated.
- Movable on Lockable Castor Wheels with Floor Brake for Safety.
- Approx. Gross Weight 85Kgs.
- Size :L x W x H : 940x660x1000mm (Open)
- Close Height : 450mm
|
| |
|
|
| |
| Transmission Stand (OLS -779) |
|
- Unique design for dismantling /
assembly of transmission .
- Capacity = 0.5 Ton
|
 |
| Gear Box Trolley Jack (OLS -780) |
|
- To hold the engine during engine overhauling.
Locking, lifting and rotating.
360 degree rotation.
Less fatigue for technicians.
|
 |
|
| |
|
| |
| Hydraulic Jib Crane (OLS -781) |
|
- Used to hold carry heavy aggregates
like engine, hydraulic gear box Heavy crank shaft etc.
- Heavy duty chains for holding parts.
- Capacity 2~2.5 Ton.
- Motorized operated.
- Castor wheel for smooth movement on
shop floor
|
| |
| |
|
| |
|
| |
| Hydraulic Press (OLS -782) |
|
| An arbor press is a small hand operated press. It is typically used to perform smaller jobs, such as staking, riveting, installing and removing bearings and other press fit work. Arbor presses are usually rated by the maximum load they can apply |
| |
| |
|
|
| |
| Arbor Press (OLS -783) |
|
| An arbor press is a small hand operated press. It is typically used to perform smaller jobs, such as staking, riveting, installing and removing bearings and other press fit work. Arbor presses are usually rated by the maximum load they can apply |
| |
| |
|
|
|
| |
Cylinder Piston Assembly Bench
(OLS -784) |
|
- Hydraulic Operated thru Manual Pump.
- MS Structure Scissor Type Design,
- Adjustable Supports for Engine Base & Transmission Support Scissor Stand.
- Movement is controlled by Lead screws.
- Twin Hyd. Cylinders Dia. 50mm.
- Powder Coated.
- Movable on Lockable Castor Wheels with Floor Brake for Safety.
- Approx. Gross Weight 85Kgs.
- Size :L x W x H : 940x660x1000mm (Open)
- Close Height : 450mm
|
|
| |
|
| |
| Heavy duty Tripod Stand (OLS -785) |
|
- Used for height adjustment and carry
under body work.
- Capacity 6~10 Ton .
|
 |
| Tripod Stand (OLS -786) |
|
- Structure made of M.S.overhauling.
- Close height 365 mm
- Maximum height 565 mm.
- Powder coated.
- Capacity 3 to 5 Ton.
|
 |
|
|
| |
| Bottle Jack (OLS -787) |
|
| |
|
 |
Hydraulic Bottle Jack features a superior quality steel frame with a safe ratcheting head and a high quality glide action pressure pump which makes it a must for every auto shop and home. This powerful jack makes big loads easy to lift and lifts to a maximum height of 15.25 inches. Weight capacity is 20 - 40 tons. |
|
|
| Pneumatic Garage Jack (OLS -788) |
|
 |
| Capacity:20-40 Ton |
|
|
| |
| Hyd. Trolley Jack (OLS -789) |
|
| |
 |
| Capacity:3-5 Ton |
| Mechanical Screw Jack (OLS -790) |
|
|
| |
 |
| Capacity:5-10 Ton |
|
| |
|
| |
| Smokeless system for Car & Truck (OLS) |
|
| |
 |
|
