|
 |
 |
 |
 |
|
TWO POST LIFT
(OLS/4W-001)
Capacity:4082 kgs,
Overall Height:3642 mm
Shut Off Height: 3499 mm,
Front Arm Reach:711 mm –1054 mm
Power : 3 Phase, 380 v, 50HZ
Motor : 2 HP
|
|
DUAL SCISSOR LIFT - HYDRAULIC
(OLS/4W-002)
Very helpful for under body inspection and minor repair works without any fatigue. |
|
ROLLING LIFT FOR BODY SHOP
(OLS/4W-003)
Operated by motorized power pack with solenoid switch, plunger pump, 2hp motor & pressure control value, capacity 3 ton.
|
|
SCISSOR LIFT WITH POWER PACK THREE WHEELER
(OLS/3W-004)
Hydro-electrcity operated.
Capacity-2 ton, Powered by Hydraulic Power Pack with 415V, 2hp motor with safety locks. Movement by Electric on/off switch. |
|
|
 |
 |
 |
 |
|
CAR LOADING/UNLOADING LIFT
(OLS/4W-005)
Length-4270 mm, Width-2300 mm, Max. Height-14 ft, Capacity-3 to 3.5 ton, Operated by motorized power pack. Movement by Electric on/off switch. |
|
FOLDING LOADING/UNLOADING RAMP
(OLS/3W-006)
Specially designed for loading/unloading Two/Three wheeler from the truck/container. Height can be adjusted as per requirement. |
|
MINI HYDRAULIC LOADING/UNLOADING ROLLING LIFT
(OLS/4W-007-01)
Assist in removal and installation of engine and gera box.
capacity: 01 Ton. Manually Hydraulic operated with four castor wheels. |
|
LOADING/UNLOADING LIFTING TROLLEY
(OLS/FW-007-02)
Assist in removal and installation of engine and gera box.
capacity: 01 Ton. Manually Hydraulic operated with four castor wheels. |
|
|
 |
 |
 |
 |
|
CONVEYER TYPE PARTS LOADING UNLOADINGTROLLEY
(OLS/4W-008-01)
Roller used for easy movement of heavy component to carry engine/gear box from one place to another. |
|
CONVEYER
(OLS/4W-008-02)
Conveyor is used in Assembly line/gear box and buffer storage of boxed unit load with flat bottom. |
|
HYDRAULIC JIB CRANE
(OLS/4W-009)
Used to hold & carry the heavy aggregates like engine, hydraulic, gera box, heavy crank shaft etc in workshop. Capacity: 1-2 ton.
|
|
DRUM LIFTER
(OLS/4W-010)
Hydraulic operated thru. manual pump. Provide facility in handling oil & diesel barrels in workshop.
|
|
|
 |
 |
 |
 |
|
FOOT OPERATED TRANSMISSION JACK
(OLS/4W-011-01)
Used for mounting / dismounting gear boxes and can be moved from bay to bay. |
|
HAND OPERATED TRANSMISSION JACK
(OLS/4W-011-02)
Used for mounting / dismounting gear boxes and can be moved from bay to bay. |
|
THREE WHEELER WASHING LIFT (H-FRAME)
(OLS/3W-012-01)
Washing lift with H frame. Mode of operation - Hydro pneumatic. Capacity - 2 Ton. Lifting height -
6 Feet. Adjustable base support to suite any size of 3 wheeler. |
|
THREE WHEELER WASHING LIFT (Y-FRAME)
(OLS/3W-012-02)
Washing lift with Y frame. Mode of operation - Hydro pneumatic. Capacity - 2 Ton. Lifting height -
6 Feet. Oil reservoir tank capacity 160 ltr. |
|
 |
 |
 |
 |
|
|
|
|
 |
 |
 |
 |
|
|
ALIGNER |
|
| |
|
