Toll Free No.: 1800 419 0319
jointing sheets
Four Wheeler Garage Equipments - Battery Charger & Tester
Battery ChARGER
 
Multi Channel Heavy Duty Battery Charger (OLS - 090)
  • Specially designed battery charging station equipped with heavy duty automotive battery charger to Charge 4 Nos. Batteries at a time.
  • 48 Volt - 100 Amps to 200 Amps
Quick Battery Charger & Booster
(OLS - 091)
 
  • Compact and movable Quick Battery
  • Charger, Boost up & Quick charge run-down battery as well as provide normal charging for 2 batteries.
  • Full Load Current : 200 Amps
  • Output Voltage : 12 - 24 V
  • Protection :Circuit Breakers on A.C & D.C.
  • Weight : 41 Kg.
 
Digital Battery Tester (OLS - 092)
  • Specially designed for testing heavy. vehicle battery.
  • Manually load setting for different types of batteries.
  • We can check the condition of battery after charging.
Digital Battery Tester (Portable) (OLS - 093)
  • Reads voltages – from 4.99 up to 19.99 Watt.
  • Reverse-hookup protection
  • Overvoltage protection
  • Checks charging system and battery voltages.
  • Digital display .
  • OCV (open circuit voltage) Table on front of Tester.
  • High-tech look and style.
 
Battery Tester (OLS - 094)
  • 100 Amp load test – for 12V batteries.
  • 50 Amp load test – for 6V batteries.
  • Tests 6V and 12V batteries – up to 1,000 CCA.
  • Top mounted toggle switch – for easier operation.
  • Heavy-duty clamps.
  • Easy-to-read meter – accurate and shock resistant.
  • Baked enamel, steel case – ventilated to keep cool.
  • Carrying handle
Digital Battery Tester with Printer (OLS - 095)
  • 100A load test.
  • Tests 6V and 12V batteries.
  • Tests 12V and 24V charging systems.
  • Operating range: 40-2000 CCA.
  • Rates: CCA (SAE), DIN, EN, IEC, JIS.
  • 3 Testers in 1: Battery (i) Charging (ii) Starting
  • Built-in printer.
  • Replaceable leads.
 
Digital Battery Charger (Heavy Duty) (OLS - 096)
  • Fully automatic microprocessor controlled / manual.
  • 350 Amp engine start – for emergency starting.
  • 70 Amp rapid charge – charges a battery in 1 to 2 hours.
  • 40 Amp and 20 Amp fast charge – charges in 1 to 3 hours.
  • 4 Amp slow charge – charges in 3 to 5 hours.
  • Fiberglass rod – for clamp storage.
  • 2.25 hour timer .
  • 1.83m output cables, 2.74m AC line cord .
  • Large face, clear view ammeter and voltmeter .
  • High-efficiency fan cooling system .
  • Heavy-duty voltage and rate control switches .
  • Automatic overload reset/short circuit protection.
  • Easy-roll, wide-track wheels
 
 
Digital Battery Charger & Jump Starter (OLS - 097)
  • Fully automatic microprocessor controlled .
  • 120 Amp engine start – for emergency starting.
  • Self-adjusting charge rates – 1230 Amp fast charge, 5 Amp medium charge and 3 Amp slow charge.
  • Desulfation mode – special mode for sulfated batteries .
  • Calcium battery mode – for acid batteries.
  • impregnated with calcium .
  • Thermal runaway protection
  • Safety start.
  • Auto voltage detection
  • Automatic temperature compensation .
Battery Charger Single Point (OLS - 098)
  • Fully automatic.
  • 2 Amp slow charge for 12 Volt batteries.
  • Microprocessor controlled.
  • LED indicators – show Charging, Charged and Power On.
  • Safety start
  • Quick-disconnect harness Use ring connector and hook up harness only once.
  • The 50 Amp clamps snap into place in sec.
  • Use 12V power plug to recharge booster packs or recharge vehicle battery via cigarette lighter port.
  • Reverse-hookup protection
 
 
 
Booster DC Power Source (OLS - 099)
  • 12V & 24 volt output.
  • Automatic charger included.
  • 16 Ah internal battery.
  • ON/OFF switch.
  • Reverse hook-up protection with alarm alert.
  • Two-function digital display.
  • 12 Volt DC power outlet.
  • 21.14 mm² gauge, 127 cm cables.
  • Heavy-duty replaceable clamps.
  • Durable polypropylene case – rust and corrosion-proof
  • Vented case – for added safety.
  • Unique, high-impact protective base.
 
Booster DC Power Source (OLS - 100)
  • Automatic wall charger included.
  • 22 Ah internal battery.
  • 12V output.
  • Heavy-duty clamps.
  • Durable polypropylene case – rust and corrosion-proof.
  • ON/OFF switch.
  • Battery status LEDs.
 
Vehicle Memory Saver (OLS - 101)
  • OBD (On-board diagnostic) connector with1.83m cable.
  • Connects through the vehicle’s OBDII port.
  • LED battery status and charge indicators.
  • Automatic wall charger included.
  • Preserves stored fault codes and programmed.electronic settings – for clocks, radio stations, seat positions, keyless entry systems, alarms, etc.
  • Durable polypropylene case – rust and corrosion-proof.
Electrical Management
 
Spark Plug Cleaner & Tester (OLS - 103)
  • Structure made of resin molded fiber canopy.
  • SPCT has been designed to cleaning of spark plug & testing the same under the stimulated condition prevailing in internal combustion
    engines.
  • Minimum pressure of 7kg/cm² which is essential for cleaning plug.
  • Electronics Vibrator : 220V / 12V
  • Input voltage : 220V, AC, 50 Hz
  • Working Pressure: 5kgf/cm -12kgf/cm²
AC Gas Recovery / Recycle / Recharge Machine (OLSPL - 103)
  • 3 Pressure level Gauge to indicate High and low pressure plus bottle pressure.
  • Automatic oil Injection with electronic scale.
  • Auto Vacuum Leak Test.
Electric test Bench (OLS - 104)
  • To check Alternator, Starter Motor, Battery & Other Electrical Equipments
    at one place.
  • Specially designed Vice to hold the starter motor
Electrician Tool Kit (OLS - 105)
  • This kit having all the necessary tools which have required by the technician at the time of servicing.
  • Insulated tools are best option for electrical industries.
Follow us
Contact Address
Copyright © 2016 Oil Lube Systems Pvt Ltd.